How to Make a Cheap Treadmill Bookshelf

020

It has been a typical winter here in the Chicagoland area with lots of wet snow and cold to go along with it. As much as i would like to run outside I don’t want to deal with the drivers around here or the possibility of a slip/fall scenario. Being forced to run inside has allowed me to get very familiar with the sounds, smells and feel of our treadmill. As I mentioned in my post on January 13th, we have done some work on our latest treadmill and I am more in touch now with the feel of the machine. We have the unit setup facing the big screen so we can be entertained during the runs, but sometimes I wish I could read a book or blow through some emails while on a fast walk (running causes too much bouncing for me too focus on a book that close to my face, without glasses).

I have looked at some of the other how to links on creating a table type surface for the treadmill but they were all too low for me. I need the material up at eye level so resting a board or other surface on the side rails, which the other solutions suggest, would not work for me.

I made a quick trip to Home Depot to visit their shelving department and found the perfect item to use as a compact, breathable, self supporting shelving unit. I selected a 4 legged metal shelf covering in a white plastic coating with small rubber tips. It was the perfect size for my brand of treadmill (Sole F63) and fit nicely in between the speakers I had added previously. My steps to create the shelf were as follows.

Parts List

Rubbermaid shelf unit – $6.00
(3) Medium sized Binder Clips – about 35 cents

Steps to create

  1. Place the shelf on the treadmill to estimate where to bend two of the legs so it grips the unit better.012 
  2. Mark the two back legs (facing away from the running surface) with a black marker so I know where and at what angle to bend the legs. 010
  3. Place one of the legs in my vice with the black mark aligned with the top of the vice.c
  4. Bend the leg to about a 20 degree angle (the angle will very depending on how snug you want the leg against the treadmill housing)005
  5. Repeat step 4 for the other leg.
  6. Place the shelf on the treadmill and make sure the bent back legs are snug enough against the housing to minimize movement (if not, repeat steps 4 and 5).011
  7. Take the three binder clips and attach them to the bottom edge of the shelf so that your book, computer, Kindle, iPad or other device does not slip off the angled surface while the treadmill is in use.021

You are now ready to walk and read, type, surf, Skype or whatever. Instead of just sitting around while I read, I can burn a few calories while I learn. There are many articles out there on how many calories you can burn while walking/running based on you height/weight/stride etc, so I won’t estimate here. Just do a Google or Bing search for calories burned while walking/running and you will have lots of data to refer to.

Walk to read. Read to learn. Learn to live.